mirror title graphics Crate example title graphic
  • Vault crate
  • International Certified
  • Straps secures to pallet
  • Bike wrapped in crate
  • Heavy Duty Hardware
  • Screwed closers
  • Fork-lift accessible

 

  • Craters load Triumph's TR6 Trophy motorcycle onto pallet used as crate floor for shipping to Canada
  • Crate builders attach tie down straps to floor of crate on Triumph's 1971 TR6 motorcycle nick named the Desert Sled
  • Crate builders bubble wrap motorcycle model that was made famous in the Steve McQueen movie The Great Escape
  • Bubble wrap protects finish before crating of rare motorcycle left in existence of only 3056 made
  • Crate builders block wheels and add support to frame of Triumph's Trophy-Bird motorcycle.
  • End panel used to check position of motorcycle before crating
  • Crate builders use side panel to check position of Triumph TR6C motorcycle that previous models won 36 championships including the Big Bear Run, Barstow to Vegas 150 Mile desert race, and the AMA Cross Country Championship
  • Bike owner visits job site to check handling of his 1971 Triumph TR6C motorcycle telling craters it was the High pipes model that increased ground clearance and the first year of the innovative oil in frame design
  • End and side panels of export wood crate are assembled for shipping of rare motorcycle
  • Honda four wheeler before loading onto crate pallet
  • Crate pallet bottom in place for Honda ATV to load
  • Staff members loading Honda TRX500FE2F onto pallet
  • 4 wheeler is centered on pallet ready to crate
  • Honda ATV is held in position inside crate with Tire Bonnets purchased from Amazon
  • All 4 tires on ATV are secured to pallet by crate staff
  • Honda ATV is safely secured on pallet floor of wood crate
  • Craters bubble wrap outside of ATV before crating
  • Finishing the bubble wrap added to ATV before crating
  • Attaching end panel of crate to pallet base for ATV shipping
  • Ringshank nailing end panel of all wood crate
  • Side view of crate showing ATV bubble wrapped and secured to crate floor with tire bonnets.
  • Craters moving side wall of crate into position to be ringshank nailed to pallet and sides
  • Pneumatic ringshank nailer fastens side wall of crate to pallet base holding ATV for shipping
  • Crater ringshank nailing end panel of crate by rear of ATV
  • View of 4 by 4 CCA treated lumber lid support inside crate
  • ATV in crate protected by lid supports enabling crates to be stacked during transport
  • Sturdy subframe inside ATV crate with top loading bars installed so crates can be stacked during transport
  • Crater nailing lid of export crate for ATV
  • Three quarter view of closed crate for shipping ATV to Canada
  • Overhead view of closed crate showing lid installed and ready to ship ATV
  • Three quarter view of finished crate ready for shipping ATV
  • Finished crate closed after installing lid supports for ATV
  • Craters moving motorcycle to shipping pallet
  • Sport bike loaded onto pallet and sitting on rear stand.
  • Installing heavy duty anchors in pallet.
  • Attaching tie down strap to anchor in pallet
  • Close up view of tie down strap on front fork of motorcycle
  • Top view of tie down straps over handlebars of motorcycle before crating
  • Close up view of front fairing with tie down straps in place
  • Craters adjust position of sport bike on pallet before attaching crate sides
  • Measuring for anchor hardware to tie down motorcycle
  • Personnel placing sidewall of crate onto pallet to check position of  motorcycle
  • Side panel and front end panel of crate for  motorcycle installed
  • Craters raising lid to close motorcycle crate
  • Ringshank nailing lid of crate for sportbike
  • All 4 sides of crate ringshank nailed to shipping pallet for motorcycle
  • Loading restored vintage motorcycle onto crate pallet
  • Attaching tie down strap to rear of vintage Honda TL 125
  • Craters attaching tie down straps to anchor hardware on pallet
  • Vintage Honda in the process of restoration is secured to pallet base of export crate
  • Craters bubble wrap classic motorcycle before assembly of wood crate
  • Crater ringshank nails end panel at front of vintage motorcycle for shipping
  • Assembling side panel of wood crate for motorcycle shipping
  • Attaching last end panel of crate for motorcycle shipping
  • Crater ringshank nails lid to wood crate protecting vintage motorcycle during shipping
  • Three quarter view of finished crate containing restored vintage Honda Trails Motorcycle
  • Honda XL 125S rolled up to pallet to secure to crate floor
  • Tightening straps at front of motorcycle to secure to pallet for shipping
  • Adjusting rear position of motorcycle on pallet to secure with straps for crating
  • Personnel wrap dirt bike in bubble wrap to protect it during crating
  • Layer of bubble wrap over top of 1979 Honda XL 125S
  • End crate panel at front of motorcycle is ringshank nailed to pallet base
  • Crater fastens side wall of crate to pallet before shipping 1979 Honda XL 125S  to Canada
  • End panel of crate at rear of motorcycle attached.  View shows motorcyle strapped to floor of crate and the motorcycle bubble wrapped
  • Crater using penumatic stapler to ringshank nail crate panel
  • Crater adds lid supports to crate
  • 2 staff members move large lid of crate into position for closing of crate
  • Top lid of crate is ringshank nailed
  • Crater inspects crate and adds additional nails to secure crate during shipping
  • Crater rolls 1980 Dirt bike onto pallet floor of crate
  • Crater checks bike will not touch sidewall of crate before mouting bike to pallet
  • Crater installs heavy duty eye bolts into floor of crate to strap dirt bike into position during transport
  • Photo shows crater securing rear of motorcyycle to pallet floor with heavy duty straps and hardware
  • Soft tie straps hold front of motorcycle by the handlebars to secure to the pallet floor of shipping crate
  • Motorcycle is bubble wrapped by craters after it is secured to pallet floor of crate
  • End panel of wood crate moved into position before attaching to pallet floor
  • Ringshank nail assembly of wood side panel for crate
  • Crate personnel move wood end panel of crate into position before pneumatic assembly of crate
  • Wood end panel at rear of 1980 Honda XL 125S pneumatic ringshank nailed to pallet floor
  • Crater nails interior lid supports of wood crate for shipping 1980 Honda XL 125S
  • Two craters shown moving crate lid into place before pneumatic nailing
  • Pneumatic ringshank nailer is used on-site to close wood crate for shipping 1980 Honda XL 125S
OUR MOST POPULAR LINKS!
bulletDEMO VIDEOS bulletCOMMERCIAL bullet36 CUFT SPECIAL
bulletON-SITE CRATING bulletINDUSTRIAL bulletUSED CRATES
bulletCALCULATOR bulletRESIDENTIAL bulletOFF-SITE CRATING
bulletISPM-15 CERTIFIED bulletPALLETS bulletTESTIMONIALS